OPTICAL FIBER

Quality Optical Fiber !

Small and Large core with a variety of jacketing.

LIMOUSINE

LED Lighting!

Automotive accessory LED Optical Fiber Lighting.

HOMELAND SECURITY

FORCE PROTECTION Products !

Tactical Safety & security lighting products.

Optical Fiber Illuminator 650026 Product Information

FIBER OPTIC ILLUMINATORS

Powerhouse PH 1000 Series 250W Quartz Halogen
(DISCONTINUED - INFORMATIONAL ONLY)
Project:
Type: Illuminator Wet / Dry
Catalog Number: PH1000, PH1100
System Component: Illuminator
 
650026_PH1000.jpg (36049 bytes)

  • 250W Quartz Halogen

  • ETL Listed for Dry and Wet Locations

  • CSA Listed for Dry and Wet Locations

  • CE Approved for Dry and Wet Locations

  • Harness Ready

  • Dimmable

  • Instant Strike/Re-strike
     
 
DESCRIPTION: (DISCONTINUED - INFORMATIONAL ONLY)
     The Powerhouse PH1000 Series Quartz Halogen illuminator is an efficient Lumenyte light source, combining intensity and economy with an optional color wheel. The color wheel can be stopped or run continuously or controlled via synchronization. The PH1000
Series is designed for interior and exterior applications without additional enclosure requirements and stays cool to the touch with minimal light leakage. It requires a PHP- type harness for all applications except twinkle wheels, which use a PH- type harness, or a PS-HARN in stranded cable applications.
 
SPECIFICATIONS:
Housing Size Dry Location:
L: 11.75" (29.8 cm)
W: 9.13" (23.2 cm)
H: 7.13" (18.1 cm)
Housing Material Glass Filled Polycarbonate
Lamp Type Quartz Halogen
Lamp Model Number XL-175 (250W MR-16 24V ELC)
Lamp Color Temperature 3150° K
Lamp Wattage 165 Watt (derated from 250 watts)
Lumen Output 800 Lumens (@15mm Aperture Port)
Rated Lamp Life 1500 Hours (Average Manufacturer Specifications)
Custom Designed Dichroic Glass
Power Consumption 1.55 Amps at 240 VAC, 2.3 Amps at 120 VAC
Lamp Reflector Custom Designed Dichroic Glass
Power Consumption Forced Air Cooling
Cooling Fan 105 C.F.M. Sealed Bearing Axial
Weight 12 Pounds (5.4 Kilograms) without options
Fuse Automatic Thermal Reset Type
Color Filters Dichroic Glass
 
PART NUMBER CONFIGURATION:
image image
image image
image image
 
image
 
Note:
1) PH illuminators are air cooled. When installed, adequate ventilation must be provided. If the illuminator is to be enclosed, install the LIC Exhaust Duct (DUCT-PH).
2) Lamp is extremely hot to the touch. Handle by reflector edges only.
Damage can occur from the natural oils of hands.
3) Fiber(s) should exit illuminator straight for at least 12" before large bends. Splice to harness fiber must occur on STRAIGHT portion of fiber, not on bend.
4) Illuminator will restart instantly after turning it off or after power outage condition.
5) PH1000 illuminators can be electrically dimmed.
6) Mount on horizontal plane with aperture sideways or mount vertically with aperture downward.
DO NOT mount with aperture upward.
 

Copyright © Lumenyte, 2008. All Rights Reserved