Fiber Optic - Optic Fibers

STA-FLEX "SWN" LINEAR OPTICAL FIBER

Project:
Type: Solid Optic Fiber Cable - No Jacket
Catalog Number: SWN
System Component: Optical Fiber

DESCRIPTION:

LUMENYTE STA-FLEX “SWN” linear optical fiber consists of a light transmitting solid large core and a Teflon cladding. The STA-FLEX core provides long-life flexibility and superb light transmission for bright and uniform luminance. SWN has a flexible bending capability, yet maintains a very smooth surface quality. Ideal for accent lighting, linear forms, glass block walls and step lighting, SWN is for interior use only, away from water,
moisture or sunlight.

STA-FLEX Large Core
Indoor Applications
Long Life Flexibility
Clear, Luminous Appearance
Wide 80° Acceptance Angle

SPECIFICATIONS:

Transmission Loss (attenuation)

Less than 1.5% per foot (SWN500)

Bend Radius (minimum)

6 x Fiber Diameter

Recommended

12 x Fiber Diameter or larger

Temperature Stability

Up to 90° C (194° F)

Spectral Transmission Range

350-800 nm

Acceptance Angle

80°

Refractive Index Core:

1.48 or greater

Cladding:

1.34 or less

Numerical Aperture

0.63

650014 Fiber Optic Lighting

Maximum Manufactured Length

• 100 feet (30.5m) continuous

Maximum Distance for Effective Brightness

The effective light output of optical fiber is based upon several variables such as:

• Intensity of light source	• Fiber length and attenuation	• Color of light
• Quantity of fibers in illuminator	• Background color contrast	• Number and radius of bends
• Diameter of fiber	• Viewing angle	• Ambient light level

Splicing and Cutting

• Splicing can be achieved in the field using Lumenyte Splice Kits and carefully following the instructions. Factory splicing is available. Lumenyte's Optic Cutter is advised for straight, clean, 90° fiber cuts.

Environment

• SWN fiber is for interior use only., away from water, moisture and sunlight
• Avoid allowing liquids between the core and cladding. Use end seals bonded with SC2081 glue.
• Avoid dirt and abrasions on the core and Teflon cladding.
• Install fibers in 10° C (50° F) or higher temperature.

Installation into the Non-Harness Illuminator

• Fiber end should be near, but not touching the illuminator glass to achieve maximum brightness.